20' Rayson Craft GN coming up for sale...

vendredi 31 octobre 2014

Just a quick post to let people know that I am going to put my Rayson Craft up for sale. I will be putting an ad and pictures up this weekend and also will have the boat here in Havasu at the Car/Boat Show tomorrow (Saturday) at Windsor site 4 off of London Bridge Road.



Thanks, Steve





20' Rayson Craft GN coming up for sale...

Christie tells ignorant protester off

I still can't really forgive him for slobbering all over Obama but this is pretty dam funny. It's 2 day old news but I'm still laughing.





Christie tells ignorant protester off

DLB Halloween?






DLB Halloween?

Under 30' 25' obsession/eliminator, cat , super charged 555

94 , 25'obsession / eliminator cat , vortex, IO, mercuiser 502, 41/4 arm, fresh 555ci 830 hp 850 tq, j&e blower pistons ,scat rods with pin oiler,billet hyd roller ,roller rockers , msd ing , csi blow throw carb ,m-3 pro charger with inner cooler , cmi headers , new mercury racing hp gimbal and xr shorty 1.50 , 34 labbed prop, new interior,bunk trailer , lovorsi gauges, full cover . $19500.00





Under 30' 25' obsession/eliminator, cat , super charged 555

Happy Birthday DaveO

Happy Birthday Dave, hope your day is a great one!





Happy Birthday DaveO

Bassett v-drive shorty bbc headers

jeudi 30 octobre 2014

GOOD SHAPE NO LINES $200








Bassett v-drive shorty bbc headers

86-96 sbc parts for sale

GLENWOOD FT COVER $150 ARMONDO V-DRIVE OIL PAN $250 STACKED ZOOMIE HEADERS 2inTUBES 2 PIECE FLANGES $300 ALL PARTS + FT ANDY 530 633 9055 OR PM:)





86-96 sbc parts for sale

19' Sunkisst tunnel any issues over 100 mph? 480 lb hull

I see some hints here on my hull on the jet boat speed question. For anyone that didn't see the other thread I bought the boat and it runs solid 85 mph. Heck jet ski's outrun that. I am building a turbo engine and want to go 110 mph. Would someone with some experience driving the 19" tunnel hull Sunkisst please chime in. I did some research on the hull before buying the boat. I know these hulls were built in all different weights and the lighter the more the issue. Ricky weighed the hull at rebuild and it is 480 pounds. I saw some were built as light as low 300's. I did a search and read for weeks before buying this boat. There is a guy close buy that has a big blown motor that runs well past 100. There is one on this site that runs 118 and Ricky has been 100 with his 555 in mine. There are some other fast ones I ran across. The only thing I have found is that they can get ugly if the engine stops. I fly aerobatic airplanes that have the glide ratio of a brick. They can get ugly if the engine stops also. I understand going fast in anything can be dangerous. This is my first jet boat but I have had really fast stuff all my life so kinda got a feel for speed. I spoke to a couple of hardcore guys about putting some power in this boat before I bought it. I am not trying to go 140, maybe 100 or 110 on smooth water. Safety is my main concern so if you guys know of any issues that are really issues with this hull let me know. I can understand it can get stupid if the engine stops or you slow down way to fast. I have made about 10 mid 80 mph runs and it slows down perfect each time, not squirrely at all. I want to hear from someone who has real life experience with these hulls. I do not want to hear from someone that was told by his neighbors uncles nephew that knew someone that had one and got thrown out. Not trying to be a smart ass or anything, I just need to know if I will really have a issue from someone that knows these boats. From what I can tell it is smooth as silk. My Baja outlaw 25 at 65 mph chine walks and feels WAY more dangerous than this boat.





19' Sunkisst tunnel any issues over 100 mph? 480 lb hull

How Democrats Win Elections

By deception and thievery of course.








How Democrats Win Elections

Secret Service and Their Latest Catch... er Harrassment.






Secret Service and Their Latest Catch... er Harrassment.

Looking for Muffler insert

I need A muffler insert for another project (just a used one dont care condition) - yep just ONE if you got one without a partner hanging around or Ill take both if the price is right.



Looks like this one from Rex marine: for a 4" header (The O.D. is like 3 7/8")





If you got one drop me a PM and let me know where to send money!





Looking for Muffler insert

Headed to F1 in Austin!

Yea Baby!!! USA FORMULA 1 GRAND PRIX - Checkin another BUCKET LIST ITEM off ! - this weekend.



A (really good) person set me up with some tickets in the Grandstand right at the START/FINISH line... hope to see some good racing!
















Headed to F1 in Austin!

Hadco axles

After finding out in Parker last week on vacation the seals for theses axles that sit under a lot of old flat bottoms don't exist anymore, I made it a mission to find them. I bought a few extras if anyone needs any.





Hadco axles

Anyone have lightened 12s and 15s for sale

Looking for 10deg lightened 12s and 15s





Anyone have lightened 12s and 15s for sale

For Sale or trade--!!!!!! 49 tooth 8 mm blower pulley or trade for 44 tooth pulley

Need to buy or trade for a 44 tooth blower 8mm pulley... shreveport, la 318-687-9088 or 318-470-1482



will sell for $60





For Sale or trade--!!!!!! 49 tooth 8 mm blower pulley or trade for 44 tooth pulley

Thermostats, warmed water for the block

What do you do if the water is not warmed by the manifolds? Like a set of headers? Is there someplace I can look to see how the water is routed? And you guys run any sort of thermostat?





Thermostats, warmed water for the block

Mercury 225X Smartcraft Question

I have a 2004 225X with a Smartcraft System monitor gauge. The SCM reads one bank and I then have another wired temp gauge that reads the other bank. The Smartcraft gauge gave me a readout the other day that I have never seen and can't seem to get info on. It reads "S t l 1" on the readout. Anyone have feedback on what this means? Thanks





Mercury 225X Smartcraft Question

Marine Dad Banned From School After Complaining About Islam Assignment






Marine Dad Banned From School After Complaining About Islam Assignment

[For Sale] Dolly Trailer frame

mercredi 29 octobre 2014

Have a good tandem axle jet trailer for a 18-19 foot v-bottom. Would make a great start for a dolly trailer. The axles were sold. Includes pink slip. $300 obo located in Lake Elsinore.





[For Sale] Dolly Trailer frame

Dolly trailer

Anybody need a good start for a dolly trailer? I have a trailer frame in good shape, check the for sale section... Figured I would post here in case somebody was lookin.





Dolly trailer

Giants win the World Series!!!

Wow, Madison Bumgarner is a STUD!!!!! Two days rest and he comes in and pitches five innings and smokes KC...:))THumbsUp:))THumbsU 3 wins and 0 loses in the world series and an

ERA of .043:yes:



Steve





Giants win the World Series!!!

Big Bock Ford Enderle injection

BBF Enderle injection set up. Bug catcher hat, fully polished, Weiand intake complete with nozzels, stainless lines, and comes with the priming nozzle. Includes a full set of pills, 55 through 150, and high speed lean out shims. Very well kept, and very clean. Can ship, but price does not include shipping. $1600






















Big Bock Ford Enderle injection

[Question] Impeller designer/ silent propulsion/ looking for some guidance

Hi,



New to the board. I'm the CTO of a company called enevor, that is built around a bunch of patents I own on an impeller.



35 years ago, when it was just a concept, it was supposed to be a silent propeller for marine propulsion. I sort of ended up in fluid mixing about 30 years ago.



Recent work on my impeller, the stuff you can do with SolidWorks and a 3D printer, I solved some issues with my initial propulsion concept. (Yes, I have another patent).



Early is ugly, so bear with me. The impeller is silent. Has a basically acoustical neutral signature. Thought was, maybe a fishing trolling device?



The impeller you see in this video is using a device that mathematically produces a thrust of about 0.005 lbs. Basically zero, but it is displacing differently. The thing moves along by creating fluid flow, sort of a conical helix. It uses this to move fluid. The fluid moves the fluid, so to speak.



I have been getting some good feedback from a few people and some military contractor types. Have a look.



I'm looking to develop this. Look for a team, a network, etc. Any feedback. Like I said, the focus is silent, but looks like we have some speed here.



Silent Marine Propulsion



Cheers



Carl





[Question] Impeller designer/ silent propulsion/ looking for some guidance

Lurker says hello

Hi- I'm Rick from Allentown Pa. I've been lurking here for way too long and I'm finally introducing myself. I have a family, a house and a job. I also have a 20' Advantage tunnel jet, hence the user name. I'm a conservative Republican and I'm absolutely disgusted with our so called leader and what the messiah and his followers are doing to our great country. I enjoying reading the many good comments and information from the conservative members of this board- please keep up the good work. I will be out next week, on Tuesday, to cast my ballot for what's right and just. Here's is something I think is pretty cool if you haven't seen it: Deck of Cards





Lurker says hello

Inspection of u joint

I have a three point engine mount in my boat and there's a cover over the u-joint. Can I remove this cover and inspect the condition of the u-joint? There is a rattling sound at idle, I read the Berkley book and basically it says u joint is probably it, but I was wondering about the rear bearing how often do those go bad and do they make a rattling sound?





Inspection of u joint

Turbo sizing please help... Single vs twin

Ok guys....

i have built a few turbo setups for cars and bikes but never a boat. I have been reading and reading and see many different things. I would like a single turbo but not sure if I need twins because of lag. Or does a jet boat spool real quick? I was told with a single I need to spray nitrous to get it out of the hole. It is a lake boat and not a all out drag boat. It will be a 500 ish big Chevy. I am doing the c&s blowthru on av gas. Boat went 84 mph with 700 hp. I am trying to go 100 to 110. My buddy has a precision pt101 with a 1.00 a/r for sale. Is that turbo completely wrong? I have made some calls but nobody seems to have much info. I can do 2 smaller twins if 100% needed, just like the single deal for some reason. Please give me some of your help if you have been through this.





Turbo sizing please help... Single vs twin

White House tries to ease flare-up over Netanyahu insults






White House tries to ease flare-up over Netanyahu insults

***wanted*** used coil for super mag 2

I NEED A COIL FOR A SUPER MAG 2 I SOLD...USED IS FINE.........:rolleyes:





***wanted*** used coil for super mag 2

Need jones tach fixed/rebuilt who ?

WHERE DO I MAIL A JONES TACH TO TO GET FIXED OR REBUILT TACH IS IN NORTHERN CALI..I SOLD TO A GUY AND IM PAYING FOR IT TO BE FIXED :)hand





Need jones tach fixed/rebuilt who ?

Who wins the Series tonight and why?

I'm routing for KC in this one. Just curious if anybody else was watching?





Who wins the Series tonight and why?

[Question] witchcraft 1979 winterizing

This is my first year of winterizing my jet boat. I have a 460 BBK Ford and I just want to make sure it gets done correctly. I know a little about winterizing but need some help. Do I do it myself or have someone else do it for me. Please send pointers this way..thank you all for your time and assistance.



Brett





[Question] witchcraft 1979 winterizing

You have Ebola? No matter, come on in!!!






You have Ebola? No matter, come on in!!!

[For Sale] 2001 Ford F-350 dually

mardi 28 octobre 2014

2001 ford f-350 xlt dually 2wd, 7.3 diesel, auto trans, silver with gray cloth int, great condition, new tires, gray camper shell, gooseneck hitch in the bed, alpine stereo, 164K miles

$17500 Mike 951-326-4273





[For Sale] 2001 Ford F-350 dually

Sidewinder Splash Drama..

I was doing a bit of research on sidewinder today and stumbled across some legal documents... I've always been into Carlson's and haven't really paid much attention to sidewinders.. But after reading the court documents and thinking about (and trolling) some other boats it makes sense... There were A LOT of early 70's boats that looked EXACTLY like the sidewinder design - including the GT-150 from Glastron..



I'm not so much of a newb that I don't know about "splashes" but I had never realized that sidewinder got raped so hard ... I read they basically based their design on the dupont car from back then.. Was there anyone before them that was similar to their design or were they truly the first?





Sidewinder Splash Drama..

BBC 16 spline crank button

looking for a bbc 16 spline crank button and driveshaft aprx 29" if you guys have any you want to part with please let me know



Thanks Anthony



BTW dont tell me to call lenco. lol





BBC 16 spline crank button

Smaller (16-23 or so..) Boats with Center Stick?

I like the idea of having a center throttle like the Baja Sidewinder or Scarab 23 SCS... Are there other "affordable" boats that have/had this setup? I believe some of the smaller CC Stinger's had this setup as well - although they did not have a true "pod" but just the throttle thrown in between the driver and the right hand passenger with center steering as well .. Not really what I'm looking for..





Smaller (16-23 or so..) Boats with Center Stick?

Engine BBC wanted

Looking for a complete or close to complete BBC set up for a circle boat. Not looking to spend a fortune since I just had my first kid but want something with decent power. Single carb deal would work for the time being. Have cash. Or if its out of my price range have a 64 Lincoln Continental (project) I could get rid of.





Engine BBC wanted

Is this oil pan acceptable?

Obviously was built. Pickup has been extended to opposite end of pan. Pretty rough on the inside but not terrible on the outside. It was on a motor but not sure if it was ever ran with it. If it's legit I'm going to re-chrome it and run it. Any idea on capacity?












Is this oil pan acceptable?

New GN boat

Congrats to Billy B, Shawn, and Ben for getting a Brad Anderson motor and there sponsorship for there new GN boat!





New GN boat

Elizabeth Warren is a Democrats' Democrat!!!

What a wonderful message. Ram, Shrew, does this make a tingle go up your leg??? (:)eek(:)







Idiots!!! :no:





Elizabeth Warren is a Democrats' Democrat!!!

Hearing the ISIS JV Team

Sure seems like an overstep for Obama's JV team of terrorists



DHS increases security at federal buildings over terror concerns | Fox News





Hearing the ISIS JV Team

[Question] moisture in valve covers

My 502 in my flat bottom has been getting a little moisture under the breathers and the inside top of the valve covers any comments on this?





[Question] moisture in valve covers

Bench racin, Oklahoma style

Put on your wet suit and snorkel you may need it. The :cowdodo:shit gets deep around here when Hillbilly, Carnie, and Hammer show up.:D May be more than you can wade through:|err





Bench racin, Oklahoma style

Imco ss tanks $400

NICE STAINLESS IMCO TANKS 8 1/2 X48 WITH NICE STRAPS XLNT CONDITION








Imco ss tanks $400

K-boat in Chandler

K-boats, Racing in Chandler
Once again we are happy to anounce the K-boats are returning again to run with the Lucas Oil Drag Boat Series. We also have a great class lined up for this event, with a boat count of up to 7 it should be a great show, and big thanks to the sponsers that supported our class in making this happen,KRA,NKRA, Advance Oil feild systems, and Franklin & Sons Plumbing and A/C, thanks again for brining the K's to Chandler, and a big thanks to MRS, K-034 for getting this together. I can't wait, its going to be a great show











K-boat in Chandler

eyes on the river

Any eyes on the river how's the green monsters floating down the river. I got tomarrow off so I thinking about taking a ride.





eyes on the river

Bikini photoshoot with Advantage

Wanted !!!!!!!! 8 mm blower pullies- 54t-48t-44t

Please call if you have the pullies i need. shreveport, la. 318-687-9088 or 318-470-1482





Wanted !!!!!!!! 8 mm blower pullies- 54t-48t-44t

V-drive input shaft material

What type of steel alloy is used for the input shaft on a v-drive. Discovered why they moved to splined shafts rather than keyed for mounting the gears when I took apart the old Belmont's Walter v-drive last weekend. No parts available for a 55 year old piece, will likely have to have a new shaft machined. Will post pics next weekend when I'm back at the other house where the boat is. A nice chunk of the shaft was loose having broken off from the side of the keyway. Was held in place by the gear being over it. Will not be acceptable for reassembly.





V-drive input shaft material

Engine Wtb ,540 ,turnkey ,engine ,complet , 550/650 hp , chapparal 255 ,

Hi





looking for a complet engine with great reliability , for my chapparal 255 SSI Boat





Turn key engine/ with dyno and perfect tuning afr



OR COMPLET WITHOUT INTAKE





GOOD STATE 502 540 570 CI ENGINE used /REANUFACTURED /New with great price :)





550 TO 700 HP / CAR OR FUEL INJECTION









WTB GM 540 TURN KEY ENGINE COMPLET 500/650 HP FOR CHAPPARAL 255 SSI USED ,NEW ...





THANKS





MIKE.





Engine Wtb ,540 ,turnkey ,engine ,complet , 550/650 hp , chapparal 255 ,

Eliminator transom extension housing

Listed on eBay polished aluminum extension housing

http://ift.tt/1tensJL





Eliminator transom extension housing

What makes a Hardin Marine engine any different than an Automotive engine

lundi 27 octobre 2014

Just a curious thought, But what makes a Hardin marine engine any different than a car or truck engine.

Talking mainly about a 80's to 90's 454 bbc. Out of curiosity i was searching for specs on the Hardin Marine engies and cant really seem to find any thing on internals, bearing clearances, marine coatings and such.

I did find one post, i think on here, and i think by Oldrigger, that said that Hardin Marine didnt actually build engines, but rather baught long blocks from the manufacturer and just bolted their accessories on.

If this is the case, are there actually any differance in things like bearing clearances, from an automotive engine?

Inquireing minds want to know!





What makes a Hardin Marine engine any different than an Automotive engine

Shameless Plug for a Cause







Shameless Plug for a Cause



10/27/2014

0 Comments





This weekend we did a little out of state traveling up to Georgia we did a visit with family and some scoping out of potential boating trips. First we checked out Reed Bingham Park in Adel, Georgia. Adel is home to my sister. This is a lovely park with beautiful camping and hiking. A while ago they used to host boating events and speed boat drag races but do to water level changes and much debris on the bottom the ranger station let me know power boating is not recommended.



Next I headed up the highway an hour and visited Lake Blacksheer State Park. This is another beautiful park with camping, hiking trails, a veteran’s museum, playgrounds and three boat ramps. There is wonderful lodging with an inn, condos and cabins. The staff at the park let us know that Chaparral holds a spring event at this park and test drives their new boats there as well. This would be one we’d like to investigate more and report back could be coming up soon.



Now on to the “Shameless Plug for a Cause” the The Boating Toys for Tots Tour 2014. This event is held in Palatka, Florida and the toys serve that local community. This will be our sixth year participating in the event. It’s a two day event with a fun run Friday and the toy drive Saturday. The boats run the St. John’s River and people attend from states near and far. There are evening events fellowshipping and dining with fellow boaters. If you’ve never participate in a community event before this is a worthy event benefitting the kids for the holidays. Loads of fun this event is geared mainly for adults we do bring along our son but don’t participate in all the evening activities as they are not appropriate for the kids.



Make your next adventure in boating one that counts for the community consider The Toys for Tots Tour 2014. We’ve included the information on the Toys for Tots event should you be interested in knowing more about the event.

https://www.facebook.com/adventureinboating



Â*Adventure in Boating. - Boating Blogs





The Boating Toys For Tots Tour 2014 , Dec 5-6 The U.S. Marines Would like to invite all boaters to The Boating Toys For Tots Tour . This will take place on the Saint Johns River in Florida on the Dec 6th weekend 2014



*



Friday Dec 5th*



. Lunch run down the river



Evening meet and greet



Dinner at host hotel*



Live band party*



Saturday Dec 6th*



A Captains meeting at 10AM*



The Toy run to Welaka*



Collection of toys by the US Marines



Lunch at the Andersen`s lodge*



Dinner at Host Hotel*



Another Live band party at the Host Hotel with a Miss Toy contest [ a bikini contest,...]



Make room reservations early[[Quality Inn Palatka 386 328 3481] as rooms fill quickly ]



We are looking for vendors and sponsors for this event contact*rostymatos@gmail.com



E-mail or call for more information .



Rus Matos 407 760 3481













Shameless Plug for a Cause

WTB BBC crank button 16 spline

if anyone has a 16 spline bbc crank button you want to sell please let me know





WTB BBC crank button 16 spline

BBC Mark IV 454 Block 4Bolt Brand new ARP Head Studs Bored .060

Have my 454 Block BARE with ARP Head studs for sale.. this is a Mark IV 454 block original 4bolt bored to .060.. this was in my Sanger and Schiada till I decided to go to a Dart 540 set up a few months ago.. Block is .060 over and will clean up with a hone to run .060 again..it has been decked and new cam bearings installed with maybe 4 hours run time since I had all machine work done.. Head studs are arp and are basically New .. 600.00 located near Sacramento area.. Bill 530-333-1047





BBC Mark IV 454 Block 4Bolt Brand new ARP Head Studs Bored .060

Polished wing w/stand $400

PM ME IF YOUR INTERESTED WILL SHIP






Polished wing w/stand $400

ypt

Im fairly surprised/upset there isn't A pic thread:yes:...

Especially more pics of a black turbo badass deal that i saw on the Facebook.





ypt

Bbc 990 heads complete

Just as the title says. Look to be in good shape. 950 shipped. Located in Salem Oregon...












Bbc 990 heads complete

What makes a Hardin Marine engine any different than an Automotive engine?

Just a curious thought, But what makes a Hardin marine engine any different than a car or truck engine.

Talking mainly about a 80's to 90's 454 bbc. Out of curiosity i was searching for specs on the Hardin Marine engies and cant really seem to find any thing on internals, bearing clearances, marine coatings and such.

I did find one post, i think on here, and i think by Oldrigger, that said that Hardin Marine didnt actually build engines, but rather baught long blocks from the manufacturer and just bolted their accessories on.

If this is the case, are there actually any differance in things like bearing clearances, from an automotive engine?

Inquireing minds want to know!





What makes a Hardin Marine engine any different than an Automotive engine?

Bearing P/N for Casale Rebuild

I decided to pull my v-drive this winter and open it up for a overdue inspection. Got it apart yesterday and actually looks pretty good inside. I think I am going to replace the bearings/seals while it is out. I have been talking to the local bearing supplier and struggling to find a Part number for the large double row ball bearing (thrust bearing?). Also, a little confusion on the top bearing with the puller groove. They come up with a slightly different part number than what my current one shows. Anyone have a list of the bearing P/Ns? This is a split case.



Here is what I found to date



2 bearings P/N 6207 C3

1 bearing marked 6306 C3 ORS RS1 Turkey (this is the one with the puller groove and has one side sealed)

1 bearing marked 6306 C3 (no puller groove or seals)

1 bearing no markings Double row ball bearing dimensions OD – 2.835”, ID- 1.375”, width- 1.062” P/N ?????

1 seal NS 50151S USA

1 seal National 472258



Any info appreciated.



Thanks

Chuck





Bearing P/N for Casale Rebuild

WTB blower manifold

WTB Blower manifold for short deck bbc (10/71) prefer polished 805 466 4719





WTB blower manifold

Fred Hart Phone number

Can someone PM me Fred or Mary Harts phone numbers? Thanks. If I weren't an idiot and lost it I would not have to ask. LOL



Paul Miller





Fred Hart Phone number

Comp cams BBC solid roller for a Blower

BBC comp cams solid roller 4-7 swap



at 50- 262 intake 272 exhaust



lift- 756 intake 739 exhaust



114 lobe



dyno time only.



$200.00





Comp cams BBC solid roller for a Blower

CHIPs in trouble over Photos ?

California Highway Patrol officers accused of stealing nude photos from female arrestees



California Highway Patrol officers accused of stealing nude photos from female arrestees | Fox News





CHIPs in trouble over Photos ?

The N double A CP

Is the NAACP Planning to Deliberately Deceive Voters in North Carolina So They Can Overturn the Voter ID Law?



Right by the liberal playbook!!!



If they included a two piece chicken box they might have something. ;)





The N double A CP

Didn't see this coming

One the smartest, talented, nicest person I have met and dealt with. I wish him all the best in his new endeavor. No doubt he will do just fine.



mamomotorsports





Didn't see this coming

Mechanical-seal-education-tutorial-packing-glands. Interesting reading

dimanche 26 octobre 2014

Thought I'd share what I found while researching lantern ring use on my Berkeley's pump packing with lantern ring cooling/lube modification I'm working on.



@ Pumpworld.com



Packing Glands





Mechanical-seal-education-tutorial-packing-glands. Interesting reading

Truck Show ???

We went to Peterbuilts 75th Anniversary Truck Show ... We learned that truck peeps are every bit as whacko as boat peeps.



Nice group, Good Time.



Peterbuilt 75th Anniversary Truck Show - steveshots





Truck Show ???

10.00 boats 660. times

What kind of 660 times et/mph are the 10.00 boats getting thanks





10.00 boats 660. times

Magnaflow pump and Jesel Belt Drive Part 2

OK, I posted something a while back about the drive for a Magnaflow water pump with a Jesel drive. Got that part figure out and just noticed my stand off is for an Enderle fuel pump and not a Magnaflow water pump. So who makes the plate to adapt the 4 bolt style water pump to a Jesel belt drive. Also, it has to clear a 7 1/2" balancer. Thanks for any help.





Magnaflow pump and Jesel Belt Drive Part 2

WTB Jetaway

Anyone have a jetaway they want to sell? Let me know?





WTB Jetaway

Fuel storage or stabilizer Question

I got 20 gallons of race gas in my tanks I never got to burn off this summer. :bangmyhead: What do you guys recommend to do with it? Fuel Stabilizer (& what brand)? Drain the tanks? I hate to let $140 worth of fuel go to waste. It's 114 leaded from local Chevron dealer (I think its sunoco).





Fuel storage or stabilizer Question

Yuma Power Tour 2014

I saw a lot of people taking pictures now here is a place to put them





Yuma Power Tour 2014

Jet Pump Mechanics San Diego???

So who can recommend a solid jet drive guy in San Diego??





Jet Pump Mechanics San Diego???

[Wanted] WTB Tandom TX-19 tailer

like the title says looking for TX-19 Trailer in TX area but what you got? thanks David.





[Wanted] WTB Tandom TX-19 tailer

Fuel pump

Hey guys.....question, I thought I'd get a ride in with the weather being nice today here in Michigan.......got a few miles from my house.....and my truck died. It kinda just acted like it ran out of gas......no refire after I pushed it off the road....it's a sbc 350 with a mechanical fuel pump.....3/8 in-3/8 out to the carb. I had a screwdriver handy and was able to remove the hose off the pump at the outlet....had my son crank it......no gas came out.....question, with just battery power.....should that be sufficient enough to pump gas? I also pulled the carb site plugs.....750 DP, seems the primary bowl was low, but the sec was close to lipping out as I rocked the truck. There is a filter on the gas line on the frame rail I replace out of the tank this Spring.....I pulled the line off it.....outlet and gas came out......thanks guys.





Fuel pump

Parker enduro

Results ?





Parker enduro

bow rail removal

im looking to remove the bow rail on my 21 ft.its original gel coat.the bolt holes are in the pinstriping prob 4 different colors whats the best way to do this ???





bow rail removal

LSX V-Drive parts list.

Probably get run in the ground for this but...



Working on a parts list to put an LSX in my V-Drive and there is just not much info out there even though it has been done on a few boats.



So far it looks like the '04-'06 GTO front sump oil pan would be the way to go for an easy bolt on pan.



SBC/BBC bell housing/front mounts should work with a little modification for the starter.



Looking into a motor plate for the rear mounts...



Water pump???



Crankshaft adapter??? I found one a while ago but can't find it now... Think it was a PTO part for around $50?...



http://ift.tt/1wtjCfm Link with a little info and pics of member "carykard" LS V-Drive with 351 Cleveland logs. Cool stuff!



If you have anything(positive:)) to add please post it up!:popcorn:





LSX V-Drive parts list.

Do these heads have any value? (Pics)

samedi 25 octobre 2014

Things have changed a bit and I'm not going to be using these. Not sure if the have any value or if they are best off in the scrap bin. I hate clutter so they are not needed here.



Number-6272990



I come up with 2.19/1.88 118cc



Unsure if those numbers are correct but it's what my searching has found.












Do these heads have any value? (Pics)

[Announcment] Sons first Vdrive

So I had my first baby cole william. Born 10/09/14. My amazing dad (grandpa) got him his first Vdrive. Barely two weeks old and already has the addiction. Another future Vdriver.





[Announcment] Sons first Vdrive

V Drive being under driven question

just picked up a family ski boat. 1970, 20 foot Arena Craft with a V drive. really cool, old style Tahoe boat. I noticed the v drive is under driven vs being at least a one to one. Why would anyone set up a boat with a under driven gear ratio? Anyone know.





V Drive being under driven question

Elsinore 01/01/15

Are any of you V-Drive guys heading out to Elsinore for New Years Day?





Elsinore 01/01/15

new circle boat pinch seat shell $175

just sold the one on the left for $150 /one on the right was just popped from the mold today lil hevier glass $175 I usually get $250 for these...........








new circle boat pinch seat shell $175

Open Trailer Hitch - Redding to San Diego/Blythe.

As the title says,there is a good chance I'm going to be traveling from Redding to San Diego tomorrow (Sunday) and I'll have an empty hitch on my half ton truck. Not too sure at this point, but will probably be returning Friday.





Open Trailer Hitch - Redding to San Diego/Blythe.

My first day out with the new boat

In about 2 hours I'm going to take this eliminator out for my first time by myself is there anything I should look for like RPMs on take off top speed steering wheel slob what things go look and listen for. Top speed of course. Just kind of a baseline run is what I'm thinking.





My first day out with the new boat

Blown Alky question about Hat / Carbs

Popped my motor awhile back , buddy has his PE Inj.Blown Alky short block up for sale I can pick up complete less heads for a song , cause he's stepping up to ProMod class and not gonna be using this block. My question is can I use 2 alky dominator carbs /fed by big elect.fuel pump on top of my blower and use my fuel tanks etc..without having to go to manual pump drive , change fuel system...yaddy yaddy yaddy... I want to keep lake able , and how well do the progressive linkage hats work as far as cruising and lake running ? :confused:





Blown Alky question about Hat / Carbs

4 bolt MK IV 454 block

I have a block that was cleaned, inspected, and had previously been freshly bored .060" before it sat. All rust has been removed, it's an early (1977) block that would hone to .070, or even .065 over if someone wanted to have pistons made.



I was not able to use this block for the engine I intended it for(I had already paid to have pistons made), since it's been previously decked quite a bit, but it's a good block with no evidence of previous failures, and would be no problem to build given the right pistons.



I would be able to help someone order and/or obtain the correct pistons $500 Block is located in Southern California.
















4 bolt MK IV 454 block

Now's the Time to Show Those Cool Jets

vendredi 24 octobre 2014

Next weekend is the last "Show and Shine" event of the year at Lake Havasu State Park, Windsor 4 and we could use some more jets. There's no entry fee -- trophies for category winners, a free sourvenir T-shirt and a load of complimentary Performance Boat Candy products. It's the FAB 40 Hot Boat Show & Shine on Saturday, November 1 -- during the big Sand-Water-RV Expo in town. There's still time to sign-up -- just click the link -- Show & Shine Application | Sand and Water Expo Lots of fun -- beer gardens, food courts and live music plus a chili cook-off competition. Hope to see you there!





Now's the Time to Show Those Cool Jets

SK class?

Does anybody know the last year the SK (ski racing runabout) class ran? What was the engine cubic inch displacement for that class? Why did it die? I could not find any info from the APBA site. Thank you.





SK class?

southbound

Is anyone from north of Fresno heading down towards stevo143 in the next couple of weeks? I have a V-Drive that needs a ride if anyone is interested. Jim (360) 710-0349





southbound

For sale Southwind Tunnel Dragster

I have 19ft. 1979 Southwind Tunnel Dragster on a tandem axle trailer ! Great project boat for someone who can do fiberglass repair work and some gel coat or paint work !The boat has rack and pinyin steering full set of gauges and wiring and the cavitation plates. No pump or engine or intake ,so you can set it up your way!the boat is located in Lake Havasu I have a clean title for the boat and trailer. The asking price on the boat and trailer is make me a reasonable offer!Im also interested in trading them for a nice tandem axle trailer for my Placecraft Tunnel? Let's make a deal.Wally wnocks@suddenlink.net 928-486-1787





For sale Southwind Tunnel Dragster

548 BBC short block

I have a 548 inch big block chevy short block ready to run. I just pulled this out of my car, has 300 street miles and 25 passes on it, nothing is wrong with it, just going higher compression. It is a gen 4 bowtie block, 4.530 bore, studded, scat standard weight 4340 4.250 stroke crank, scat h beams, srp 10cc dome pistons (10.5 to 1), isky ezx max solid roller lifters, comp roller cam .748 lift, 286/294 @ .050, billet timing set, melling oil pump, coated bearings, moly rings, cometic head gaskets, ready for a top end. $5000 or make an offer, Mark (209)-747-2715, located in the Lodi area





548 BBC short block

Endurance... What make's an engine worthy?

So, it's been brought up over the years, but not really addressed to my satisfaction (that I recall).



What is it in an engine build, other than powerband specific details, that make or break a marine engine in long duration WOT operation? Why is a drag engine not gonna run laps? What are we worried about breaking, what changes solve it, and why not make those changes the norm?





Endurance... What make's an engine worthy?

blown or n/a

Not changing my combo but me and a buddy were at the shop yesterday polishing my heads .we had a conversation about if the motor made the same power but one was blown and one was n/a wich one would you rather run and why.. fellas............





blown or n/a

WTB or WTT

Hello. I am in need of BBC windage tray bolts 6 ea and t-stat housing also bbc. Thank you Mel





WTB or WTT

Kyle Anderson need help with number and adress

I need some help trying to contact him for months I need his address and where he works.please contact me 616-318-4560 this is urgent.





Kyle Anderson need help with number and adress

windshield

jeudi 23 octobre 2014

Anybody know where to get a windshield made or just buy one? Need one for a 79 sleekcraft Jr executive





windshield

precision marine joe shelfo jr.

I unfortunately haven't been on the forum for some time and out of the hot boat seen for way to long. Im trying to strike a deal with a friend who has two boats, one being a trade. Im looking for joe shelfo jr as i remember him when i was into the seen heavily back in the day. Reason im trying to locate him is part of the deal is my buddies other boat needs restrung and its a shovel nose sanger. Im located in northern California, any help in the matter would be more then greatly appreciated. Thank you all and sincerely just another hotboat junkie wanting back in.





precision marine joe shelfo jr.

Rexmar wtf

So back a couple of weeks ago I ordered some parts from Rex. Since I was going to be out of the country for a week, I requested the order be shipped on the 15th. I have received the parts coming directly from Rex, however a week and a half later I am still without the A22 shaft that I was told would ship direct from the machinist. Numerous calls to Rex go unanswered, anyone know who they use for A22 propshafts? This sucks!





Rexmar wtf

Big Block Chevy parts

Posting parts for a friend who is too lazy to post. I have the parts here in Glendora



GM 049 heads, stripped, cleaned and apparently magged (evidence of mag dust). All valves and hardware in a box (not shown or counted to make sure it's all there) $300









Holley List #7163 600 cfm marine vacuum secondary carb, (shows signs of new kit having been installed) $100







Edelbrock Torker 2-O (oval port), blasted clean. $75







MK IV outdrive pan, not sure if this is a Gil, 10" deep with removable baffle arrangement. Have not seen a pickup for it, will edit if one is found. $150 without pickup.








Big Block Chevy parts

Fresh 468 k motor and more....

Fresh Never Fired Professionally Built 468 Alcohol K Motor

AFR heads, Bill Miller Rods....lots to list

7400.00

PM me for details...

Dave
















Fresh 468 k motor and more....

Headers

Anybody running rewarder upswept headers on a v-hull, looking to buy a new set of headers, just wanted a little input on them thanks.





Headers

[Video] Vid from Chouteau- Q2

Just a little ride down the river on a hot Saturday afternoon.








[Video] Vid from Chouteau- Q2

No Keystone Pipeline?

You just knew this would happen. Obama bows to his left wing greenie doners. He would rather screw American workers.



Join the Discussions!

Register | Login

Gone: The jobs Obama doesn't want



By Adriana Cohen, Boston Herald October 23, 2014 11:50 am

Text Size: A A A





(File Photo)



For six years, under heavy pressure from environmental groups, President Obama and countless Democrats have blocked passage of the Keystone project -- a Canadian energy pipeline that would have shipped oil from Alberta to the U.S., creating thousands of jobs.A U.S. State Department review found that the pipeline would create upward of 42,000 jobs during the construction period alone. Economists, meanwhile, have found that the pipeline would create 20,000 manufacturing and construction jobs and an additional 118,000 spinoff jobs, according to media reports.

The president has refused to greenlight the project despite the obvious need for U.S. manufacturing jobs. Instead, Obama and fellow Democrats have bowed to environmental groups and strangled the energy project in red tape.

Canada has had enough. They have decided to circumvent Obama and his posse of misguided environmentalists and go East. A Canadian energy company, Energy East, is planning to build its own major oil pipeline, bypassing the United States completely and shipping its crude directly overseas. End result? Canada wins. The U.S. loses tens of thousands of jobs. The environment isn't benefited whatsoever.

This is what happens when liberals implement job-killing regulation without looking at the big picture or examining the unintended consequences.

"The new pipeline will cost $10.7 billion and could be up and running by 2018. Its 2,858-mile path, taking advantage of a vast length of existing and underused natural gas pipeline, would wend through six provinces and four time zones. It would be Keystone on steroids, more than twice as long and carrying a third more crude," reports Bloomberg.

This is not how to protect Mother Earth or how to do business with our biggest ally. The environment doesn't benefit by blocking the Keystone XL by having a much larger pipeline being built in its place. Thousands of needed U.S. jobs are lost and environmentalists have egg on their face. Or should we say Democrats?

Bottom line: With $18 trillion in national debt and millions of Americans unemployed, the U.S. government should be implementing policy that grows our economy and creates needed jobs. Cowering to special interest groups is not the way to achieve those objectives.

Adriana Cohen is a Boston Herald columnist and radio host. Visit adrianacohen.com and follow her on Twitter @AdrianaCohen16





No Keystone Pipeline?

Cav plate

Being new to flat bottom boats, I have a question about the boat I just bought (1975 Kindsvater 19 foot). The cav plate on mine has "no" split in the middle of the plate, it's a solid plate clear across. The boat builder (Harold) was stunned to hear there wasn't a split and told me to get a sawzall and cut it a blades width right down the center to just before the transom. I've looked at all the flat bottom pics on this site that show cav plates and from what I can see, all of them have the split. The gentleman I bought it from says that's how he got it and never questioned it. My question, why is this plate not spit? I'm thinking it should be split especially since the builder says to, but before I start cutting it, I thought maybe I could get some input from you guys as to any reason why it would be a solid plate. By the way, it has the dual pedal system. Thanks!





Cav plate

BBC Short Block (Almost)

Not quite a short block, BBC 4 bolt main 100 over, GM steel 4" stroke crank (external balance), Eagle H Beam Rods, SRP pistons with rings, no cam, no lifters no bearings. Just the block, crank, rods and pistons. Kit Comes out to 475 cu in. $500.00 Located in Chatsworth, CA. Jason (818) 522-6364 will post pics later.





BBC Short Block (Almost)

Unions kil a plant in Palmdale






Unions kil a plant in Palmdale

Ford 351W Stroker 408 engine

Ford 351w Engine that's been stroked to a 408.. this is no run of the mill stroker engine this is a Built engine that should be around the 500HP range.. All machine work has been done.. the heads are dart with 2.05 intakes and 1.60 exhaust Stainless steel valves titanium retainers and Comp Camps roller rockers.. Hydraulic roller cam (I will get the cam card unsure of right now).. Nodular iron Stroker crank and H-beam rods.. Gear drive timing.. fluid damper (not a cheap one) comes with Auto Flexplate and Balanced ..Heads are studded and Crank Mains are studded with ARP bolts.. this engine is Brand new never ran.. there was A LOT Invested in this engine.. im asking about 1/2 of what it cost to build.. Oh yeah the heads are Ported and polished .. friend from Missouri Built the engine who owns a Machine shop.. guy who ordered engine never finished paying for it so I ended up getting it from him... looking to sell for 5,000.00 ..

Will post pics soon and is located Near Sacramento.. Bill 530-333-1047





Ford 351W Stroker 408 engine

2000 Advantage Party Cat 500 Efi with whipple

double post please delete





2000 Advantage Party Cat 500 Efi with whipple

Questions anyone???

Send us your questions we want to help!!



-DM



Motor Check Oil Analysis Testing Clinic | Oil Sample Test Kits





Questions anyone???

hey PTC you getting paid this ad

WTB turn buckles

mercredi 22 octobre 2014

need 4 turn buckles to put after plains on drag boat thanks Rex @ 318-393-2526:))THumbsUp





WTB turn buckles

27 ultra shadow for sale

2002 ultra shadow boat is in great shape. 496 bored to a 509 raylar crank,raylar aluminum heads, raylar blower cam,rayar blower pistons,whipple super charger,dana exhaust,have dyno sheet phaff dynode it 838 torque at 3000 rpm and 727 hp at 4800 rpm. has a new silver scx drive with a sc lower.spins a 30 labbed maxmus also has a stock 28 maximus.Stereo 2 jl audio 1200/1 2 jl audio 600/4 4 kicker L7 subs 12 kicker 6 1/2 alpine head unit 3 pucks,system is loud and crystal clear. boat has to much to list,Boat was the cover boat for ultra advertising.orange purple lime green pin stripping 75,000 obo 831 915-9005 call if intrested





27 ultra shadow for sale

Bbc rewarder headers

Have a set over the transom headers they are coated older set with water lines, weep holes were plugged from factory, they come with Drew shot gun baffles, was going to have them recoated but I noticed today that one primary tube has a pin hole in it (bigger than a pin hole) still seem solid in that area and should be good for a few more years, would like to get 300.00 for them, they do polish out nice still. 707-310-9819.





Bbc rewarder headers

WTT Enderle K-Valve for Barrel Valve

Does anyone want to trade? I have an Enderle K-Valve for an Injector hat that is set up for alcohol with the Stainless Hardline that goes to the Fuel Block linkage to Bird Catcher Hat, it also has two check valves included. I want to trade it for a standard square Barrel Valve set up for Alky with the hardline to the Fuel Block and with the idle and High speed bypass valves as well as linkage to the Bird Hat.

The one I have when it was new was $100 more than the Square style. I am Willing to trade straight accross.

Chris





WTT Enderle K-Valve for Barrel Valve

Parker Enduro Live Stream

Qualifying on Friday and the Race on Saturday will both be live streamed this year for the Parker Enduro. Live Stream will start around 11:00 am on Friday of portions of the Drivers Meeting. We will also be recording Parts of the Friday Night Banquet and payouts for Qualifiers and streaming that the following morning before the Enduro, which will start at 10:00 AM.



The live feed window can be found on the front page http://www.RiverDavesPlace.com



RD





Parker Enduro Live Stream

Wanted miersch

Wanted miersch blower manifold for tall deck bbc thanks





Wanted miersch

WTB BBC short block, or trade plus cash for the one i got

i have a LS6 468 short block with 13.5-1 pistons that i would like to sell, very fresh engine but its a 2 bolt main and i am going to spin this thing 7k+ in my circle boat so it won't work. complete assembled with a nice dooley pan, perfect for a ditch pump boat. 900$



looking for a 500ci or smaller short block with a nice forged crank, H beams Rods and perferably around 10-1 pistons but not dead set on pump gas. has to be internally balanced as i am going to replace the balancer with a drive hub.



so cal canyon lake

626-991-2129

Eric





WTB BBC short block, or trade plus cash for the one i got

Biesemeyer boats for sale

I have 2 Biesemeyer boats for sale.

(1)1981 narrow haul boat. Won many, many races including national championship. $25,000 for boat and dolly trailer. $35,000 for blown alcohol motor shown in pictures or a legal very competitive SS motor.

(2)1976 capsule boat. One of a kind with three cavitation plates and a drop keel. State of the art Jones capsule. $35,000 for boat and dolly trailer. $55,000 for PS motor shown in pictures. There is more than 60K just in motor.

Both boats are extremely competitive in any class of flat bottom racing or used for the river.



I have extra motors for sale, lots of prepellers, life jacket, capsule helmets from Tiger Performance etc.



Call or e-mail for details.



Brian

239.253.0557

bohlis@comcast.net



Link to pictures is https://www.icloud.com/photostream/#A4532ODWGBMxaZ





Biesemeyer boats for sale

O....Canada

Parliament attacked by 2 gunmen. One guard has died. Terrorism at it simplest. Hope Canada wont call it work place violence.





O....Canada

We need parts ride to pheonix races end of oct

Somebody by me going to the races..i need to get 1 seat shell and set of zoomies to jj.beaverfab. He will be in the pits.....wont take up much room.......thanx mouz i will meet or diliver close to me....





We need parts ride to pheonix races end of oct

motor angle

What degree angle should motor be when stringers are level? Need to make new plates





motor angle

Edelbrock Victor R rectangle port polished mainifold for BBC

Only ran one season flange for dominanter cnc by reher Morison 400$ obo It won't let me load pics I'll try to load some later or can email pics if interested.





Edelbrock Victor R rectangle port polished mainifold for BBC

Selling tanks out of my daytona

No leaks great shape . It won't let me load pics but I'll put some up later or I can email some . Make offer





Selling tanks out of my daytona

Stacked tanks

I'm looking for staked tanks with brackets for my daytona





Stacked tanks

8mm home videos of drag boats from the 70's

mardi 21 octobre 2014

"A Game" in Blown Gas Jet - NJBA October Race 2014

October 21, 2014



Hello People



Just wanted to say the 149 Tsunami crew chief was able to execute the best methodical setups that yielded a final ET 6.028 without driver creativity, Jim Brock brought his “A Game” to the track.:)Unsure

That eagle eye was right on “Q” for all of his calls. The boat responded to each fine tuning of the jet set up couple with power reductions.



Thanks to my crew and Jim Brock for making it happen.



Willis





"A Game" in Blown Gas Jet - NJBA October Race 2014

wtt enderle bird for carbs adapter linkage ect

I have a really sweet enderle bird with polished butterflies & dist block hard lines all set up for alky. Im looking to trade it for a carb set adapters, to the blower, linkage, hardlines ect looking for doms or 950. please no junk. I also have a 110 pump. everything well taken care of





wtt enderle bird for carbs adapter linkage ect

[For Sale] 8 lug 17" aluminum wheels and tires

Selling for a friend, set of 4 8 lug aluminum wheels and tires. 35 x 12.50 x 17, tires show wear, consider the tires free with purchase of rims. $400 obo, located in Newhall, or may bring to Glendora for a sure sale.












[For Sale] 8 lug 17" aluminum wheels and tires

Detroit officials bristle at UN visit, scolding over water shut-offs






Detroit officials bristle at UN visit, scolding over water shut-offs

Racing Fuel offered online, nationwide shipping

Fellow Racers, while I know it might be considered SPAM, I am posting here because I know how difficult finding race fuel can be. Hopefully the thread will not be deleted.





We’re pleased to annouce the launch of our new website, Amber Racing Services - Delivering Race Gas Nationwide! VP, F&L and More..., offering nationwide delivery of our VP and F&L fuels PLUS No Drum Deposits! For you SoCal residents, you can also order you...r formula on our website and select Will-Call pick up at one of our five convenient locations. Check us out today at Amber Racing Services - Delivering Race Gas Nationwide! VP, F&L and More...







Hope this helps out those racers in areas that aren't local to a distributor.







Thanks for your time.





Racing Fuel offered online, nationwide shipping

Order for millions of blank work permits, green cards raising amnesty concerns






Order for millions of blank work permits, green cards raising amnesty concerns

Blue Skies , Birthday Boy and Breezy Girl

Blue Skies , Birthday Boy and Breezy Girl



10/21/2014

0 Comments





What a sweet day we enjoyed on the water this Sunday. The sky was blue and beautiful the water glistened like diamonds there’s just something about this time of year and boating. The humidity is lower and trolling through the Dora canal was shady and cool, not a drop of sweat, heavenly. I have to say the Fall is the best time to get out and boat in Florida.



This was a special day our boys tenth birthday and we let him pick the activity he chose boating on the Harris chains and lunch at Crazy Gators. Our daughter Bree had just returned after a seven week vacation with her Mom it was wonderful to have the whole family boating together again. Joe enjoyed practicing a little more driving the boat soon he’ll be a pro. It was great day as a family celebrating and doing what we love.



The lakes were not too crowded which baffles me a little once October comes the boat traffic seems to slow down. It’s just crazy! This is the best time to get on out there and enjoy sunny days and cooler temps. Don’t put your boats away just yet get on out there and enjoy our beautiful weather and all the fun holiday events. The towns of Mount Dora, Eustis and Tavares offer many festivals, boat races, craft shows and holiday boating parades. If you’ve never checked them out you’re missing out. Mount Dora and Eustis have Christmas parades on the water for boaters to participate. We’ve done it a couple of times and its lots of fun and definitely gets you in the holiday spirit.



Don’t get yourself landlocked for you next adventure in boating consider boating your way in to the holiday season you may even discover some new holiday traditions.

http://ift.tt/1qdR1Fd



Â*Adventure in Boating. - Boating Blogs






Blue Skies , Birthday Boy and Breezy Girl

F/S Numark NV 4 Deck Serato DJ Controller $400

NEW ARRIVAL in Mackzadok outlets with exclusive Brand new products.

Get the best price and fast free shipping by dealing with us with complete confidence

These Products Come with their full Accessories and one(1)year International Warranty

They are all Brand New Original Products

CONTACT: sales(at)mackzadocks.com





Numark NV 4 Deck Serato DJ Controller $400

Numark 4TRAK Traktor DJ Controller. .$400.00

Numark iDJ Pro Premium DJ Controller for iPad . $399.00

Numark NS6 4-Channel Digital DJ Controller and Mixer. .$500.00

Numark CDX Direct-Drive CD Turntable : $500.00

Numark NS7 4-Channel Digital DJ Controller and Mixer : $950.00

Numark X7 Mixer.............$500.00

Numark X2 Pro Hybrid Turntable And CD / MP3 Player…..$700.00

Numark DVD01 Dual DVD Player………$400.00

Numark 5000FX 12" 5-Channel Tabletop Mixer ….$300.00

Numark DXM09 Digital DJ Mixer…$350.00

Numark V7 DJ Turntable Controller....$250.00

Numark Mixdeck Turntable Player......$400.00

Numark HDMIX Hd Mix Pro Dj Cd Mixer....$560.00

Numark AVM02 Audio/Video Mixer with Effects …$500.00

Numark CM200USB 5-Channel 19" Rackmount DJ Mixer ….$300.00

Numark DXM06 2-Channel Digital Mixer….$350.00

Numark iDJ 2 DJ Console for the iPOD ..$540.00

Numark NuVJ Video Mixer ……$200.00

Numark Omni Control USB DJ Controller...$280.00

Numark CM100 Club Series DJ Mixer….$250.00





Pioneer DDJ-SZ - Professional DJ Controller with Serato $1100

Pioneer DDJ-SX2 - 4-Channel DJ Controller with Serato $600

Pioneer DDJ-SR 2-Channel DJ Controller : $400.00

Pioneer DDJ-SX 4-Channel DJ Controller : $550.00

Pioneer DDJ-S1 DJ Controller for Serato DJ Software… $400.00

Pioneer DDJ-T1 DJ Controller for Traktor DJ Software $500.00

Pioneer DDJ-WeGO3 Compact Digital DJ Controller $200

Pioneer VSW-1 Automatic Video Switcher for DVJ-X1 System: $200.00

Pioneer CDJ-200 Pro CD player: $250.00

Pioneer CDJ-800MK2 Professional CD/MP3 Turntable: $402.00

Pioneer CDJ-2000 - Professional Multi Player: $799.00

Pioneer CDJ-1000MK3 CD/MP3 Players: $720.00

Pioneer Platinum Edition CDJ-2000 / DJM-900 / RMX-1000 Package.. $6,000.00

Pioneer SVM-1000 4-Channel Audio and Video Mixer……$5,100.00

Pioneer XDJ-Aero Wireless DJ System… .$500.00

Pioneer DJM-909 Professional 2 Channel Mixer: $720.00

Pioneer DJM-800 Professional DJ Mixer: $840.00

Pioneer DJM-2000NEXUS Professional Performance DJ Mixer: $999.00

Pioneer DJM-1000 Six-Channel Professional DJ Mixer with 24-bit: $1850.00

Pioneer DJM-5000 Rack Mount 4-Channel Professional DJ Mixer: $550.00

Pioneer DJM-750 Black Professional DJ Mixer… .$730.00

Pioneer DJM-900SRT - 4-Channel Professional DJ Mixer for Serato….$2,300.00

2X Pioneer CDJ-850 + DJM-850 Mixer Package.. .$2,800

Pioneer 2x CDJ350 - 1x DJM350 Package (white) : $1300.00

Pioneer CDJ-1000MK3/DJM-800 Package with Coffin Case Features: $3000.00

PIONEER NEW AUDIO/VIDEO MIXER: SVM-1000 : …..$2800.00

Pioneer CDJ-2000 Nexus & DJM-2000 Nexus $1300.00

Pioneer Blue Edition CDJ 400-K & DJM 400-K with HDJ1000: $1410.00

Pioneer CDJ-2000 & DJM-900nexus Limited Edition White: $2800.00

Pioneer CDJ-2000-M & DJM-900NXS-M Platinum Edition Limited Edition: $5000.00









Canon EOS 1D X 18.1 MP Digital SLR Camera .$3,500

Canon EOS 5D Mark III 22.3 MP Digital SLR Camera .$2100

Canon EOS 60D 18.0 MP Digital SLR Camera .$590

Canon EOS 60Da 18.0 MP Digital SLR Camera .$1,100

Canon EOS 70D 20.2 MP Digital SLR Camera $800

Canon EOS 7D 18.0 MP Digital SLR Camera .$900

Canon EOS 6D 20.2 MP Digital SLR Camera .$590

Canon EF 24mm f/2.8 IS USM Lens. .$400





Nikon 1 J4 18.4 MP Digital camera - Mirrorless - White $500

Nikon 1 J4 18.4 MP Digital camera - Mirrorless - Orange .$540

Nikon 1 V2 14.2 MP Mirrorless Digital Camera - Black .$650

Nikon 1 V2 14.2 MP Mirrorless Digital Camera - White - 1 NIKKOR VR 10- $700

Nikon 1 V2 14.2 MP Mirrorless Digital Camera - Black - 1 NIKKOR VR 10 .$900

Nikon 1 V2 14.2 MP Mirrorless Digital Camera - Black - 1 NIKKOR VR 10 $640

Nikon 1 AW1 14.2 MP Mirrorless Digital Camera - Black - 1 NIKKOR $500

Nikon Nikon 1 Aw1 Digital - 14.2 Mp Camera With 1 Nikkor Aw 11-27.5mm $500

Nikon 1 AW1 14.2 MP HD Waterproof, Shockproof Digital Camera System....$600









Rene MP4 Rackmount DJ Mixer $300

Rane MP44 DJ Club Mixer .$1,100.00

Rane Empath Touring/Club Mixer $780

Rane MP 2016a 6-Channel Rotary Mixer .$1,000

Rane SL 3- Scratch Live SL3 Serato $480

Rane TTM 57SL Performance Mixer with Serato Scratch $1150

Rane TTM 56S Performance Mixer $650

Rane MP25 Club Mixer. .$1,200

Rane MP 2016A 6-Channel Rotary Mixer $1,100

Rane MP26 Rackmount DJ Club Mixer $1,400

Rane Sixty-Eight DJ Mixer for Serato Scratch Live .$1,700

Rane Sixty-two 62 Dj Mixer For Serato Scratch Live. $1,900

Rane Sixty-One Performance Mixer with Serato Scratch Live .$1,200



Denon DN MC6000 . ..$540.00

Denon DN-X500 Professional 19" Mixer $250.00

Denon DN-X100 Professional 2-Channel DJ Mixer… $150.00

Denon DN-X1100 4 Channel DJ Mixer. .$580.00

Denon DN-S5000 Tabletop DJ CD player …$650.00

Denon DN-S3700 DJ Digital Media Turntable. .$600.00

Denon DNS1200 Tabletop Multi-Format DJ CD MP3 Player $350.00

Denon DN-D6000 Dual CD MP3 Player… $350.00

Denon DN-D9000 Dual Pro CD Player $700.00

Denon DJ Compact CD/USB Media Player and Controller .$320.00

Denon DN-D4500 Dual CD/MP3 Player….$300.00

Denon DN-S3500 Professional CD/MP3 Turntable .$470.00

Denon DN-HD2500 Hard Disk Media Player/Controller…$400.00

Denon DN-X900 Professional 19" Analog/Digital Mixer…..$350.00



Vestax PMC-05PROIII DJ Mixer… .$600

Vestax PMC-500 DJ Mixer .$1,100

Vestax PMC-05PROSL DJ Mixer with Sampling…..$450

Vestax PMC-06 Pro A 2 Channel DJ Scratch Mixer……$300

Vestax VCI-100 Tabletop DJ MIDI Controller ….$350

Vestax VCI-300 MIDI DJ Controller + Serato…….$500

Vestax PMC-08Pro Professional Hybrid Digital Mixer…..$450



Yamaha 01V96VCM Digital Mixer . $1,200

Yamaha 01V96I Digital Mixer… $1,400

Yamaha 02R96VCM Digital Mixer… … $4000

Yamaha MGP32X Analog mixing console … …$800

Yamaha MGP24X 24 Channel Analog Mixing Console… $1000

Yamaha SPX2000 Digital Multi Effects Processor … $500

Yamaha Tyros5 76 Arranger Workstation .$3000

Yamaha Tyros5 61 Arranger Workstation …$2500

PreSonus ADL 600 2 Channel High Voltage Tube Preamp……… $1000

PreSonus ADL 700 1 channel High Voltage Tube Channel Strip $1,200

PreSonus StudioLive 16.0.2 16 x 2 recording digital mixer……… $600

PreSonus StudioLive 16.4.2 16 Channel Digital Mixer … $1000

PreSonus StudioLive 24.4.2 24x4x2 recording digital mixer .$1,200



Presonus StudioLive 32.4.2AI 34.4.2 32 channel Digital Mixer $1500

Presonus StudioLive 18sAI Active Integration Subwoofer .$600

Presonus StudioLive 312AI Active Integration Loudspeaker $700

Presonus StudioLive 315AI Active Integration Loudspeaker… $800

Presonus StudioLive 328AI Active Integration Loudspeaker $950

Presonus StudioLive 32.4.2AI 34.4.2 32 channel Digital Mixer $1500

Presonus StudioLive 18sAI Active Integration Subwoofer… $600

Presonus StudioLive 312AI Active Integration Loudspeaker $700

Presonus StudioLive 315AI Active Integration Loudspeaker $800

Presonus StudioLive 328AI Active Integration Loudspeaker .$950

We give maximum guarantee for safe delivery of items bought from us.

FOR MORE DETAILS: sales(at)mackzadocks.com





Shipping/Support/policy

Shipping Options

We work with multiple carriers to offer you different shipping options.

UPS is our preferred carrier, but you may also choose FedEx

Expedited shipping options are also available for quick or faster deliveries.

But additional cost

We ship within 3-5 business day from receipt of payment worldwide.

Enclose your shipping address by email correctly.

Pick-up IS ALLOWED at your convenient.

CONTACTS: sales(at)mackzadocks.com

Please notify us immediately within 14 days after delivery is made

Return items must have all original packaging and accessories

NOTE: All returned or exchanged items must be in new condition, in their original box

(must include all packing material, manuals, & all accessories).





F/S Numark NV 4 Deck Serato DJ Controller $400

New too jet boats

lundi 20 octobre 2014

Bought this to redo for a family boat. Gonna take awhile to get it done, family first. Will be looking for any tips or help along the way. It is a 76 22' Hustler Daycruiser. Have not been been able to find any info about it. Have only found one other like it. If anyone knows anything about them would be very interested.








New too jet boats

Kindsvater

Is Harold Kindsvater still in business? If so, does anybody have a recent telephone number that I can reach him at? I have a number (559-299-2328) which I got from an old post about Kindsvater boats on this website. Is this number still good? I have a few questions I'd like to ask him about a boat of his I just purchased (19' flat). Thanks in advance for any information anyone might have.





Kindsvater

Remote oil filter

What size oil lines to use? Any advice much appreciated.





Remote oil filter

Looking for air over Electric valves

Anyone know where I can buy a In out valve for my casel and a valve for my lenco 2 speed? Both now are on air with a manual push air valve. I want to put the buttons on the steering wheel.





Looking for air over Electric valves

Air over electric valves for casel and lenco

Anyone know where I can buy a In out valve for my casel and a valve for my lenco 2 speed? Both now are on air with a manual push air valve. I want to put the buttons on the steering wheel.





Air over electric valves for casel and lenco

** v-drive stuff ** tanks/headers/struts ects ects

7-struts 1" all diff..............$100 for all or $25 each



water pump...........$40



exaust trumpets.......all $50 or $40 set 2-sets



scoop flat old school dual carb ...$25



gold 5 gal drag tank........$100



headers v-drive shortys w/extensions for gn race boat $250



gas pedal w/cable $40



holley carb.....$100



triametric pedal $40



old spark arrester...$100



complete 1960 389 pontiac old school motor tunnelram w/3x2,s carbs comes with exuast and water pump/timeing cover

motor needs to be completely gone thru and rebuilt sitting over 7 yrs

sold as is..............$1250



dan olsen wing w/stand polished $450



text/email for pictures of any item you would like to see nine five one 870-6910





** v-drive stuff ** tanks/headers/struts ects ects

LS oil pan

Anybody ever figured out what LS oil pan works in a vdrive?





LS oil pan

testing 1..2..3?

test





testing 1..2..3?

Repair shop in Fresno ?

Hey guys, I know it's not a boating question, but does anyone know of a good honest auto repair shop in Fresno...daughter has a Toyota that needs work....



THX





Repair shop in Fresno ?

Fixed Diverter Pics

Can some one please post pics of a fixed diverter adjusting rod?





Fixed Diverter Pics

4.8L out of a 2002 chevy 1500

I have a complete motor I pulled out of a wrecked truck. Has wiring harness (no ecu) all the catalyst and O2 sensors. around 100k miles when I pulled it out. al brackets, AC compressor, power steeing pump, all there. Cab was totalled on the truck I pulled it out off. needs a belt, a idler pulley, 4 throttle body bolts and ECU and its ready to rock and roll.



$1200 located in San Diego 760-455-8588 Kyle





4.8L out of a 2002 chevy 1500

Side Gunnel Gas Tanks

Will the 8 1/2" dia. Imco side gunnel gas tanks fit into a '78 Sanger Ski Hydro?. Imco tanks are 8 1/2" diameter, the existing tanks are 7" dia.



On the new tanks, the filler neck is offset 2 1/2" from centerline. The filler neck on the existing tanks come up to the bottom of the gas tank cap neck, so the location of the filler neck on the new tank would have to be 'right on'.



The other possible location for the filler neck would be horizontal at the top of the front end cap. Then the tank would be connected with an 'L-shape 2" dia. flex fuel hose to the gas cap. This set-up would allow for some flex between the tank and the gas cap.



Any suggestions?





Side Gunnel Gas Tanks

Highlight of my weekend at NJBA

Was watching Ben Wurster coming into the outramp waiting for his crew to give him the thumbs up that he just won the championship! :+1: what an exciting race this weekend in the 9.0 class! There were 3 teams that had a shot at title and Ben pulled it out! Congrats on the Championship!!





Highlight of my weekend at NJBA

Pgj

Did the record go down this weekend ??





Pgj

[Announcment] WTS Pioneer DJM-5000 Rack Mount 4-Channel Professional DJ Mixer: $550.00

SEASONAL BONAZA in Mackzadok outlets with exclusive Brand new products

Get the best price and fast free shipping by dealing with us with complete confidence

These Products Come with their full Accessories and one(1)year International Warranty

They are all Brand New Original Products

CONTACT: sales(at)mackzadocks.com





Pioneer DDJ-SZ - Professional DJ Controller with Serato $1100

Pioneer DDJ-SX2 - 4-Channel DJ Controller with Serato $600

Pioneer DDJ-SR 2-Channel DJ Controller : $400.00

Pioneer DDJ-SX 4-Channel DJ Controller : $550.00

Pioneer DDJ-S1 DJ Controller for Serato DJ Software… $400.00

Pioneer DDJ-T1 DJ Controller for Traktor DJ Software $500.00

Pioneer DDJ-WeGO3 Compact Digital DJ Controller $200

Pioneer VSW-1 Automatic Video Switcher for DVJ-X1 System: $200.00

Pioneer CDJ-200 Pro CD player: $250.00

Pioneer CDJ-800MK2 Professional CD/MP3 Turntable: $402.00

Pioneer CDJ-2000 - Professional Multi Player: $799.00

Pioneer CDJ-1000MK3 CD/MP3 Players: $720.00

Pioneer Platinum Edition CDJ-2000 / DJM-900 / RMX-1000 Package.. $6,000.00

Pioneer SVM-1000 4-Channel Audio and Video Mixer……$5,100.00

Pioneer XDJ-Aero Wireless DJ System… .$500.00

Pioneer DJM-909 Professional 2 Channel Mixer: $720.00

Pioneer DJM-800 Professional DJ Mixer: $840.00

Pioneer DJM-2000NEXUS Professional Performance DJ Mixer: $999.00

Pioneer DJM-1000 Six-Channel Professional DJ Mixer with 24-bit: $1850.00

Pioneer DJM-5000 Rack Mount 4-Channel Professional DJ Mixer: $550.00

Pioneer DJM-750 Black Professional DJ Mixer… .$730.00

Pioneer DJM-900SRT - 4-Channel Professional DJ Mixer for Serato….$2,300.00

2X Pioneer CDJ-850 + DJM-850 Mixer Package.. .$2,800

Pioneer 2x CDJ350 - 1x DJM350 Package (white) : $1300.00

Pioneer CDJ-1000MK3/DJM-800 Package with Coffin Case Features: $3000.00

PIONEER NEW AUDIO/VIDEO MIXER: SVM-1000 : …..$2800.00

Pioneer CDJ-2000 Nexus & DJM-2000 Nexus $1300.00

Pioneer Blue Edition CDJ 400-K & DJM 400-K with HDJ1000: $1410.00

Pioneer CDJ-2000 & DJM-900nexus Limited Edition White: $2800.00

Pioneer CDJ-2000-M & DJM-900NXS-M Platinum Edition Limited Edition: $5000.00









Canon EOS 1D X 18.1 MP Digital SLR Camera .$3,500

Canon EOS 5D Mark III 22.3 MP Digital SLR Camera .$2100

Canon EOS 60D 18.0 MP Digital SLR Camera .$590

Canon EOS 60Da 18.0 MP Digital SLR Camera .$1,100

Canon EOS 70D 20.2 MP Digital SLR Camera $800

Canon EOS 7D 18.0 MP Digital SLR Camera .$900

Canon EOS 6D 20.2 MP Digital SLR Camera .$590

Canon EF 24mm f/2.8 IS USM Lens. .$400





Nikon 1 J4 18.4 MP Digital camera - Mirrorless - White $500

Nikon 1 J4 18.4 MP Digital camera - Mirrorless - Orange .$540

Nikon 1 V2 14.2 MP Mirrorless Digital Camera - Black .$650

Nikon 1 V2 14.2 MP Mirrorless Digital Camera - White - 1 NIKKOR VR 10- $700

Nikon 1 V2 14.2 MP Mirrorless Digital Camera - Black - 1 NIKKOR VR 10 .$900

Nikon 1 V2 14.2 MP Mirrorless Digital Camera - Black - 1 NIKKOR VR 10 $640

Nikon 1 AW1 14.2 MP Mirrorless Digital Camera - Black - 1 NIKKOR $500

Nikon Nikon 1 Aw1 Digital - 14.2 Mp Camera With 1 Nikkor Aw 11-27.5mm $500

Nikon 1 AW1 14.2 MP HD Waterproof, Shockproof Digital Camera System....$600









Rene MP4 Rackmount DJ Mixer $300

Rane MP44 DJ Club Mixer .$1,100.00

Rane Empath Touring/Club Mixer $780

Rane MP 2016a 6-Channel Rotary Mixer .$1,000

Rane SL 3- Scratch Live SL3 Serato $480

Rane TTM 57SL Performance Mixer with Serato Scratch $1150

Rane TTM 56S Performance Mixer $650

Rane MP25 Club Mixer. .$1,200

Rane MP 2016A 6-Channel Rotary Mixer $1,100

Rane MP26 Rackmount DJ Club Mixer $1,400

Rane Sixty-Eight DJ Mixer for Serato Scratch Live .$1,700

Rane Sixty-two 62 Dj Mixer For Serato Scratch Live. $1,900

Rane Sixty-One Performance Mixer with Serato Scratch Live .$1,200



Denon DN MC6000 . ..$540.00

Denon DN-X500 Professional 19" Mixer $250.00

Denon DN-X100 Professional 2-Channel DJ Mixer… $150.00

Denon DN-X1100 4 Channel DJ Mixer. .$580.00

Denon DN-S5000 Tabletop DJ CD player …$650.00

Denon DN-S3700 DJ Digital Media Turntable. .$600.00

Denon DNS1200 Tabletop Multi-Format DJ CD MP3 Player $350.00

Denon DN-D6000 Dual CD MP3 Player… $350.00

Denon DN-D9000 Dual Pro CD Player $700.00

Denon DJ Compact CD/USB Media Player and Controller .$320.00

Denon DN-D4500 Dual CD/MP3 Player….$300.00

Denon DN-S3500 Professional CD/MP3 Turntable .$470.00

Denon DN-HD2500 Hard Disk Media Player/Controller…$400.00

Denon DN-X900 Professional 19" Analog/Digital Mixer…..$350.00

Numark NV 4 Deck Serato DJ Controller $400

Numark 4TRAK Traktor DJ Controller. .$400.00

Numark iDJ Pro Premium DJ Controller for iPad . $399.00

Numark NS6 4-Channel Digital DJ Controller and Mixer. .$500.00

Numark CDX Direct-Drive CD Turntable : $500.00

Numark NS7 4-Channel Digital DJ Controller and Mixer : $950.00

Numark X7 Mixer.............$500.00

Numark X2 Pro Hybrid Turntable And CD / MP3 Player…..$700.00

Numark DVD01 Dual DVD Player………$400.00

Numark 5000FX 12" 5-Channel Tabletop Mixer ….$300.00

Numark DXM09 Digital DJ Mixer…$350.00

Numark V7 DJ Turntable Controller....$250.00

Numark Mixdeck Turntable Player......$400.00

Numark HDMIX Hd Mix Pro Dj Cd Mixer....$560.00

Numark AVM02 Audio/Video Mixer with Effects …$500.00

Numark CM200USB 5-Channel 19" Rackmount DJ Mixer ….$300.00



Vestax PMC-05PROIII DJ Mixer… .$600

Vestax PMC-500 DJ Mixer .$1,100

Vestax PMC-05PROSL DJ Mixer with Sampling…..$450

Vestax PMC-06 Pro A 2 Channel DJ Scratch Mixer……$300

Vestax VCI-100 Tabletop DJ MIDI Controller ….$350

Vestax VCI-300 MIDI DJ Controller + Serato…….$500

Vestax PMC-08Pro Professional Hybrid Digital Mixer…..$450



Yamaha 01V96VCM Digital Mixer . $1,200

Yamaha 01V96I Digital Mixer… $1,400

Yamaha 02R96VCM Digital Mixer… … $4000

Yamaha MGP32X Analog mixing console … …$800

Yamaha MGP24X 24 Channel Analog Mixing Console… $1000

Yamaha SPX2000 Digital Multi Effects Processor … $500

Yamaha Tyros5 76 Arranger Workstation .$3000

Yamaha Tyros5 61 Arranger Workstation …$2500

PreSonus ADL 600 2 Channel High Voltage Tube Preamp……… $1000

PreSonus ADL 700 1 channel High Voltage Tube Channel Strip $1,200

PreSonus StudioLive 16.0.2 16 x 2 recording digital mixer……… $600

PreSonus StudioLive 16.4.2 16 Channel Digital Mixer … $1000

PreSonus StudioLive 24.4.2 24x4x2 recording digital mixer .$1,200



Presonus StudioLive 32.4.2AI 34.4.2 32 channel Digital Mixer $1500

Presonus StudioLive 18sAI Active Integration Subwoofer .$600

Presonus StudioLive 312AI Active Integration Loudspeaker $700

Presonus StudioLive 315AI Active Integration Loudspeaker… $800

Presonus StudioLive 328AI Active Integration Loudspeaker $950

Presonus StudioLive 32.4.2AI 34.4.2 32 channel Digital Mixer $1500

Presonus StudioLive 18sAI Active Integration Subwoofer… $600

Presonus StudioLive 312AI Active Integration Loudspeaker $700

Presonus StudioLive 315AI Active Integration Loudspeaker $800

Presonus StudioLive 328AI Active Integration Loudspeaker .$950

We give maximum guarantee for safe delivery of items bought from us.

FOR MORE DETAILS: sales(at)mackzadocks.com





Shipping/Support/policy

Shipping Options

We work with multiple carriers to offer you different shipping options.

UPS is our preferred carrier, but you may also choose FedEx

Expedited shipping options are also available for quick or faster deliveries.

But additional cost

We ship within 3-5 business day from receipt of payment worldwide.

Enclose your shipping address by email correctly.

Pick-up IS ALLOWED at your convenient.

CONTACTS: sales(at)mackzadocks.com

Please notify us immediately within 14 days after delivery is made

Return items must have all original packaging and accessories

NOTE: All returned or exchanged items must be in new condition, in their original box

(must include all packing material, manuals, & all accessories).





[Announcment] WTS Pioneer DJM-5000 Rack Mount 4-Channel Professional DJ Mixer: $550.00

1966 18' AquaCraft (Wickens) Flat bottom V-Drive. 5k OBO. Idaho

dimanche 19 octobre 2014

1966 18' AquaCraft (Wickens) Flat bottom V-Drive for sale in Boise Idaho. Asking $5000.00 OBO



Boat is in good shape, no leaks at all and 390 ford engine runs great!

Has Casal V-Drive. GPS speed at 65 on good water here about 3300 ft altitude.

Engine was purchased from Ron Minegar (AKA Speedboat Racer) and then new lifters put in the motor, plus new Holley vacuum secondary carb and HEI style distributor installed.

Dual Stainless fuel tanks.

New Electric Fuel Pumps.

All new gauges install.

New Trailer lights and wiring.

Seats in good shape.



PM me with any questions.



Video of engine running





Pics.


























1966 18' AquaCraft (Wickens) Flat bottom V-Drive. 5k OBO. Idaho

Great experience with buying parts on this site.

I have been buying parts here and there on the internet as well as on this site for a few years. I just want to report on an exceptional transaction experience with one of the members here on this site. I purchased a Mallory Sprint Mag here on this site in the parts section and we had good communication and the pics were great. I made my payment and the seller gave me the tracking number and all was well. He even checked in to make sure I had received the package by the expected date.

Now is when it gets way good. I opened the package and the seller had done a very nice job packing the part and protecting it from most normal shipping conditions. When I looked at the distributor cap it had some of the Bakelite insulation broken off at one terminal. I looked in the bottom of the box and I found the broken pieces. The box had been dropped, kicked or crushed in transit. The cap was mounted on the distributor during transit and it might have not gotten damaged had it been packed loose in the box. Nevertheless I sent some pictures to the seller just to show him that it had gotten damaged in shipping. I made it clear that I was not bitching but just wanted him to see what happened during shipping. He e mailed me in short order and offered to refund my money if I wanted or he offered to buy me a cap to replace the damaged one. I chose the latter and a new cap that I had picked out arrived yesterday.

This is a great site and there are many great people on here to deal with not just in parts but with information and support for your project.



I want to publicly thank him for his good will, honesty and integrity beyond expectations.



Thanks again



Paul





Great experience with buying parts on this site.